New robotic system stacks outbound pallets and unloads incoming ones from a single cell, cutting labor cost, floor space and payback time for warehouse and distribution operations
WIXOM, MI, October 7, 2026: ISD – Integrated Systems Design today announced its palletizing and depalletizing launch, the Palletizing Module. The robotic system builds outbound pallets and breaks down incoming ones from a single cell. Most competing systems handle only one direction, requiring separate equipment, separate floor space and separate capital budgets for each function.
The system combines a robotic arm, custom end-of-arm tooling, machine vision and integrated controls into one automated cell. The vision system identifies box or case dimensions in real time and adjusts placement patterns accordingly, whether the robot is building a pallet or breaking one down. Operators switch the system between palletizing and depalletizing modes without reconfiguring hardware.
Measurable Impact
- 43% labor reduction compared with manual palletizing and depalletizing operations
- Up to 70% typical payback on equipment cost versus running two dedicated single-function systems
- 9- to 18-month ROI, depending on shift structure and throughput volume
That flexibility addresses a real operational pattern in distribution facilities: incoming freight often arrives on one shift and outbound orders ship on another. A facility receiving raw materials or components in the morning and shipping finished goods in the afternoon can now run both processes through the same cell instead of maintaining two dedicated systems, which helps drive the labor and capital savings above.
“Running palletizing and depalletizing through one cell means a customer isn’t paying twice for equipment that sits idle half the day,” said Tony Morgott, President at ISD. “It changes the capital math and the footprint math at the same time, and the payback numbers reflect that.”
System Specifications
- Cycle rate: 10 to 25+ cases per minute, depending on robot and pattern
- Payload capacity: Up to several hundred pounds per pick, robot dependent
- Reach: 6 to 10+ feet, depending on robot class
- Pallet height: Up to 8 feet, application dependent
- Investment: Single-line systems, including collaborative robot (cobot) cells, range from approximately $60,000 to $250,000 for simpler configurations; higher-speed or extensively integrated systems can exceed $500,000, depending on throughput, payload, tooling, safety requirements, and installation and integration scope
ISD designed the Palletizing Module to work with multiple robot platforms rather than a single proprietary arm. The company evaluates collaborative, industrial, SCARA and gantry robots for each installation based on payload, cycle time and floor space requirements, then integrates the platform that fits the application.
On the operations side, the dual-mode design also simplifies maintenance and training. A single cell means a single set of safety protocols, a single maintenance schedule and one crew trained on one system, rather than two.
“From an engineering standpoint, running one cell instead of two isn’t just a cost story, it’s a reliability story,” said Robert Jones, senior distribution consultant at ISD. “Fewer systems means fewer failure points and a simpler maintenance plan for the customer’s team.”
That approach reflects ISD’s role as a systems integrator rather than a single-product manufacturer. The company builds and configures automation systems around a customer’s existing facility, product mix and labor constraints, rather than requiring the customer to adapt to one vendor’s fixed platform.
Full technical detail on the Palletizing Module, including configuration options and additional specifications, is available on ISD’s palletizing and depalletizing systems page. Warehouse and distribution operators interested in the Palletizing Module can schedule a consultation with ISD’s engineering team to evaluate fit for their facility. ISD also offers a palletizing application checklist for operations teams to gauge whether robotic palletizing fits their operation before engaging in a formal evaluation.
Palletizing Module: Questions and Answers
What is the difference between a standard palletizer and ISD’s Palletizing Module?
A standard palletizer typically only builds outbound pallets. The Palletizing Module performs both palletizing and depalletizing from the same cell, so one system handles freight moving in both directions.
What robot brands does ISD use for palletizing systems?
ISD evaluates collaborative, industrial, SCARA and gantry robot platforms for each installation rather than committing to a single manufacturer, selecting the platform that best fits the application’s payload, cycle time and floor space requirements.
How much does a robotic palletizing system cost?
Single-line robotic palletizing systems, including collaborative robot (Cobot) cells, can range from approximately $60,000 to $250,000 for simpler configurations. Higher-speed or extensively integrated systems can exceed $500,000. Final pricing depends on throughput, payload, tooling, safety requirements, and installation and integration scope.
What is the cycle rate of a robotic palletizer?
Cycle rates typically range from 10 to 25 or more cases per minute, depending on the robot platform and the palletizing pattern used.
About ISD – Integrated Systems Design
ISD – Integrated Systems Design is a warehouse automation systems integrator and OEM manufacturer based in Wixom, Michigan, with several decades of experience serving distribution and manufacturing operations. ISD designs, builds and integrates automated material handling systems, including the UltraStore Mid-Load automated storage and retrieval system (ASRS) and the OptimalOps-Process™ software platform. ISD serves customers across food and beverage, consumer goods, industrial manufacturing and third-party logistics.